Friday, June 23, 2017

Florges (Pokemon)

Florges is a Pokémon whose green lower body resembles a mermaid's tail with two large leaves blooming on either side of the flukes. Its upper body is white and slender, with sylphlike arms that end in three dainty fingers; it has two black, diamond-like shapes on each side of its svelte torso. Florges's head is rounded with a pointed, upturned nose and long teardrop-shaped ears, while its dark-colored eyes are framed by lengthy green lashes. It no longer carries a single flower like its pre-evolution did, but instead a large bouquet of ornate flowers around its head. The color of its flowers depends on whether it held a Red, Yellow, Orange, Blue, or White Flower as a Flabébé. Florges claims well-tended flower gardens as its territory, and it basks in energy emitted from flowers to obtain power. It is a female-only species.

About the Model:
Height: 30cm
Width: 27.6cm
Depth: 16.9cm
Number of Pages: 6
Number of Parts: 129

Notes: Florges was built by Giden445. Thanks for building!
Pdo files (without textures) are included. Edge ID pdf files is included as well.
The model is very complex and difficult, so use of the pdo is highly recommended!

Saturday, June 17, 2017

Charmander (Charizard Costume) (Pokemon)

Charmander is a bipedal, reptilian Pokémon with a primarily orange body. Its underside from the chest down and soles are cream-colored. It has two small fangs visible in its upper jaw and two smaller fangs in its lower jaw. Charmander has blue eyes. Its arms and legs are short with four fingers and three clawed toes. A fire burns at the tip of this Pokémon's slender tail, and has blazed there since Charmander's birth. The flame can be used as an indication of Charmander's health and mood, burning brightly when the Pokémon is strong, weakly when it is exhausted, wavering when it is happy, and blazing when it is enraged. It is said that Charmander dies if its flame goes out. However, if the Pokémon is healthy, the flame will continue to burn if gets a bit wet and is said to steam in the rain. Charmander can be found in hot, mountainous areas. However, it is found far more often in the ownership of Trainers. As shown in Pokémon Snap, Charmander exhibits pack behavior, calling others of its species if it finds food.

About the Model:
Height: 14cm / 49.9cm
Width: 14.3cm / 51cm
Depth: 11.4cm / 40.8cm
Number of Pages: 3 / 27
Number of Parts: 70 / 82

Build Order: Follow the video :D

Notes: Charmander was built by Saibros. Thanks for building!
Two textureless .pdo files are included in the package! Pdo file for use in Pepakura VIEWER only. An Edge ID pdf file is included as well.

Wednesday, June 14, 2017

Eevee (Life-Size) (Pokemon)

Eevee is a mammalian, quadruped creature with primarily brown fur. The tip of its bushy tail and its large furry collar are cream-colored. It has short, slender legs with three small toes and a pink paw pad on each foot. Eevee has brown eyes, long pointed ears, and a small black nose. This Pokémon is rarely found in the wild, and is mostly only found in cities and towns. However, Eevee is said to have an irregularly shaped genetic structure that allows it to adapt to many different kinds of environments. Eventually, Eevee may evolve to better suit its surroundings. According to Pokémon Mystery Dungeon, Eevee has a naive personality.

About the Model:
Height: 30.5cm
Width: 31.9cm
Depth: 35.6cm
Number of Pages: 11
Number of Parts: 102

Build Order: Hair, ears, head, fur, front legs, body, hind legs, tail.

Notes: Eevee was built by Giden445. Thanks for building!
Pdo files (without textures) are included. An Edge ID pdf file is included as well.

More poses for Eevee, and more crafts coming really soon, so be sure to check back!

Saturday, June 10, 2017

Pinocchio (Sitting)

Pinocchio is the main protagonist from the 1940 film of the same name. He is a living puppet who must prove himself worthy to become a real boy, with the help of Jiminy Cricket as his conscience. Walt Disney and his crew used a marionette model and child actor Dickie Jones, who voiced Pinocchio in the movie, to animate the character.

About the Model:
Height: 30cm
Width: 28.4cm
Depth: 33.3cm
Number of Parts: 99
Number of Pages:  11

Build Order: Hat, feather, hair, face, ears, nose, neck, collar, tie, hands, arms, vest, body, thighs, shoes, calves.

Notes: You can poke holes on both sides of the upper parts of the knees, and put rolled up pieces of paper through them. Then glue the ends of those rolls to the lower parts of the knees. That way you the legs can "hang". Connecting the vest and body can be a bit difficult.
Two textureless .pdo files are included in the package! Pdo file for use in Pepakura VIEWER only. An Edge ID pdf file is included as well.

Friday, June 9, 2017

Mystery Dungeon Squirtle

Squirtle is a small Pokémon that resembles a light blue turtle. While it typically walks on its two short legs, it has been shown to run on all fours in Super Smash Bros. Brawl. It has large eyes and a slightly hooked upper lip. Each of its hands and feet have three pointed digits. The end of its long tail curls inward. Its body is encased by a tough shell that forms and hardens after birth. This shell is brown on the top, pale yellow on the bottom, and has a thick white ridge between the two halves. Squirtle's shell is a useful tool. It can withdraw into the shell for protection or for sleeping, and its grooved, rounded shape helps to reduce water resistance when this Pokémon swims. Squirtle can spray foamy water from its mouth with great accuracy. In the past, Skull Bash was its signature move. Squirtle is scarce in the wild, although it can be found around small ponds and lakes. The anime has shown that it can be found living on secluded islands with other members of its evolutionary line.

About the Model:
Height: 15cm
Width: 10.4cm
Depth: 16.2cm
Number of Pages: 4
Number of Parts: 45

Build Order: Just follow the video :D

Notes: Squirtle was built by SuperRetroBro. Thanks for building!
Two textureless .pdo files are included in the package! Pdo file for use in Pepakura VIEWER only. An Edge ID pdf file is included as well.

Thursday, June 8, 2017

Ella (Bust) - Cinderella (2015)

Ella is the main character in the 2015 live action film adaptation of Disney's Cinderella. She was portrayed by British actress Lily James. Cinderella was born to wealthy, unnamed parents, who treated their daughter with great love. The family resided in a French chateau, just beyond a small but powerful kingdom. Sometime during her childhood, Cinderella's mother tragically passed away, and as a result of believing his daughter needed a mother figure in her life, Cinderella's father remarried to a woman named Lady Tremaine, who notably had two daughters of her own, both around Cinderella's age: Anastasia and Drizella. After the death of her father, Cinderella was under the control of Lady Tremaine, whose true colors finally surfaced, showing a cruel and cold-hearted woman. Her selfishness and vanity destroyed both the family fortune and left the once handsome chateau in disrepair. While pampering her own two daughters and spoiling them rotten, she raised Cinderella in abuse and virtual slavery. This was a result of being wickedly jealous of the young girl's natural beauty and charm, which she and her own daughters all lacked. This went on for many years, but Cinderella's personality still remained sweet, humble and kind.

About the Model:
Height: 96cm
Width: 26.6cm
Depth: 15.1cm
Number of Pages: 44
Number of Parts: 151

Build Order: Hair, Face (+mouth and teeth), arms, body, stand, logo.
Notes: Pdo files (without textures) are included. You can build the face without the inside of the mouth. It's barely visible, anyway. Ella is HUGE, either be prepared with a lot of space (height-wise) or print 2 or more sheets per page to shrink her down.

Saturday, June 3, 2017

Birthday Special - Charizard (Pokemon)

Charizard is a draconic, bipedal Pokémon. It is primarily orange with a cream underside from the chest to the tip of its tail, which burns with a sizable flame. Charizard has a long neck, small blue eyes, raised nostrils, and two blunt horns protruding from the back of its rectangular head. There are two fangs visible in the upper jaw when its mouth is closed. Two large wings with teal undersides sprout from its back, and a horn-like appendage juts out from the third joint of each wing. Charizard's arms are short and skinny compared to its robust belly, and each limb has three white claws. It has stocky legs and cream-colored soles under its feet.

About the Model:
Height: 30cm
Width: 38.6cm
Depth: 30cm
Number of Pages: 15
Number of Parts: 136

Build Order: Just follow the video :D .

Notes: Charizard was built by the amazing SuperRetroBro. Thanks for building!
Pdo files (without textures) are included. Use of said pdo files is highly recommended!

Monday, May 29, 2017

Shelmet (Pokemon)

Shelmet is a bivalve or snail-like Pokémon. Its gray shell resembles a knight’s visor, with a coiling spiral of its shell further back. The shell has protrusions on the underside, which it apparently uses as legs. Its inner body is pink with a long, puckered mouth, and green markings below its eyes. It closes the lid on its helmet-like shell as a defensive tactic, and can spit a poisonous sticky fluid. It thrives in moist habitats like bogs and swamps.

About the Model:
Height: 9.9cm / 25cm
Width: 6.4cm / 16cm
Depth: 13cm / 32.5cm
Number of Pages: 2 / 9
Number of Parts: 27 / 33

Build Order: Mouth, inner body, shell top, shell coil, shell bottom, legs.

Notes: Pdo files (without textures) are included.

Thursday, May 25, 2017

Pikachu (Charizard Costume) (Pokemon)

Pikachu is a short, chubby rodent Pokémon. It is covered in yellow fur with two horizontal brown stripes on its back. It has a small mouth, long, pointed ears with black tips, brown eyes, and two red circles on its cheeks. There are pouches inside its cheeks where it stores electricity. It has short forearms with five fingers on each paw, and its feet each have three toes. At the base of its lightning bolt-shaped tail is patch of brown fur at the base. A female will have a V-shaped notch at the end of its tail, which looks like the top of a heart. It is classified as a quadruped, but it has been known to stand and walk on its hind legs.

About the Model:
Height: 14cm / 30cm
Width: 13.5cm / 29cm
Depth: 10.4cm / 22.3cm
Number of Pages: 3 / 12
Number of Parts: 57

Build Order: Just follow the video :D .

Notes: Pdo files (without textures) are included.

Monday, May 22, 2017

Alolan Raichu (Pokemon)

In Alola, Raichu has lighter coloring and more rounded features. Its eyes are blue with yellow half-circles along the bottom. It has large yellow ears with an inner spiral toward the base and brown on the inside. These ears are thicker and less pointed than a standard Raichu's ear. In addition to its white belly, Alolan Raichu has white markings on its paws with bright yellow lines between its digits. The stripes on its back have also turned white, and there is a small, white circular marking on each heel. The lightning bolt-shaped tip of its tail has rounded edges. By collecting its psychic power in its tail, it is able to ride it like a surfboard and float in the air. While its cheek sacs are still used to store electricity, rubbing them releases a sweet aroma. This is also thought to be connected to its psychic abilities. Raichu's transformation in Alola into Alolan Raichu is a mystery, but the natives suppose that maybe it ate too many sweet, fluffy pancakes.

About the Model:
Height: 40cm
Width: 40.1cm
Depth: 19.9cm
Number of Pages: 11
Number of Parts: 64

Build Order: Head, ears, arms, body, legs, tail.
Notes: Pdo files (without textures) are included.